Metal Roof Repair in Leander, TX
A metal roof should outlast everything under it. When yours starts leaking at a seam or a fastener, Plenox Solutions finds the real source and fixes it right, then backs the repair with a lifetime workmanship warranty. Serving Leander and statewide TX.
Metal roof repair, not metal roof replacement
Most metal roofs do not need to come off when they spring a leak. They need someone who will get up there, walk every seam and penetration, and find the one spot that actually failed. That is repair work, and it is a different job than an install. A good metal roof has decades left in it, so the goal is to keep yours on the house and stop the water at its source.
On a metal roof, leaks almost always trace back to a handful of usual suspects: a backed-out fastener that left an open hole, a failed neoprene washer under the screw head, a seam that worked loose in the wind, a pipe boot that dried and cracked, or flashing at a chimney or valley that was never detailed right. We chase the water back to whichever one it is and repair that, instead of guessing and resealing the whole roof.
If the panel itself is dented, punctured by hail, or oil-canning at a fastener line, we can replace that panel or that fastener run without disturbing the rest of the field. Your free roof quote costs nothing and the visit is no-obligation, so you find out what is wrong before you spend a dollar.
How we run a metal roof repair
No tear-off until it is truly warranted. The whole point of a repair is to keep the roof you have on the house, so the work moves in plain steps.
We find where the water actually gets in
Water on a metal roof rarely drips straight down from the hole. It runs along a panel rib or the underside of the deck and shows up feet away from the real failure. We trace it back, on the roof and in the attic, so we repair the source and not just the stain on your ceiling.
You get the repair scope in plain words
We tell you exactly what failed and what it takes to fix it: how many fasteners, which seam, whether a panel needs to come off. The number is on paper before we start, and if a repair will genuinely solve it, that is what we recommend instead of selling you a new roof.
We fix the failure and re-seal it to last
Bad fasteners come out and get replaced with the correct size and a fresh washer. Loose seams get re-fastened and sealed with the right metal-roof sealant, not whatever was in the truck. Cracked boots and tired flashing get swapped, and dented or punctured panels get replaced so the field reads clean again.
We back the repair and check the airflow
The repair carries our lifetime workmanship warranty, and while we are up there we check that the attic is still venting the way it should, because a hot attic is what dries out boots and washers in the first place. See finished metal work in our project gallery.
Why metal roofs leak in TX
Metal handles Central TX weather better than almost anything, but the metal itself is rarely what fails. The failures are at the fasteners and the joints, and in TX heat they show up faster than the brochures admit. An exposed-fastener metal roof can have hundreds of screws holding the panels down, each one with a small rubber washer under the head. Under years of 100-degree afternoons and cold snaps, those washers harden, the metal expands and contracts, and screws slowly back themselves out. One backed-out screw leaves a clean hole straight through your roof, and the wind-driven rain from a TX spring storm finds it fast.
Hail is the other big one. A hailstorm that would only bruise shingles can dent a metal panel hard enough to fracture the finish or split a seam, and the damage often is not obvious from the ground. That is exactly when a real inspection matters, because dented panels and stressed seams left alone become leaks the next time it rains sideways. We document hail and wind damage with photos so it is clear what happened and when, which also matters if you end up filing a claim.
One backed-out screw leaves a clean hole straight through your roof, and the wind-driven rain from a TX spring storm finds it fast.
Plenox Solutions, Leander TXThen there are the penetrations: pipe boots, vents, swamp-cooler curbs, satellite mounts, anything that pokes through the panels. Each one was sealed when the roof went on, and each one dries out and cracks on its own schedule. On a metal roof these are the spots we check first, because they are the most common source of a leak that has nothing to do with the panels at all.
Repair vs. replace, told straight
A leaking metal roof does not automatically mean a new roof. If the panels are sound and the problem is fasteners, seams, or flashing, a repair will hold for years and you keep the roof you already paid for. We only call for replacement when the panels themselves are failing across the field, when corrosion has gotten under the coating, or when so many fasteners have given out that chasing them one at a time stops making sense. When that is the honest answer we will say so and walk you through a new metal roof, but we are not going to push you there to leak in a few years.
A repair you do not have to babysit
The reason to call a roofer who stands behind the work is so you never have to think about that repair again. Every metal roof repair we do carries a lifetime workmanship warranty, which means we are accountable for how the fix was done for as long as you own the roof. On top of that, the six years of weatherproofing we include gets done annually, so we come back and catch the next tired fastener or boot before it ever turns into a stain on your ceiling.
Our crews are OSHA certified, so a steep metal roof gets worked safely and correctly, not rushed. And because we are Lomanco-certified in attic ventilation design, we check the airflow on every visit, since the heat that builds in a poorly vented attic is what ages out the sealants and washers a metal roof depends on. That is what doing it the right way looks like once the truck leaves your driveway.
Metal roof repair questions
The questions homeowners ask us most about a leaking or damaged metal roof. Call and we will answer yours in plain terms.
Call (432) 288-5562Can a metal roof leak be repaired, or do I need a whole new roof?
In most cases it can be repaired. The metal panels usually have decades of life left, and the leak is coming from a backed-out fastener, a loose seam, or a cracked pipe boot, all of which we fix without touching the rest of the roof. We only recommend a full metal roof replacement when the panels themselves are failing across the field or corrosion has gotten under the coating. We will tell you straight which one you are looking at after we get up there.
Why is my metal roof leaking when the panels look fine?
On a metal roof the panels are rarely the problem. The water almost always comes in at a fastener whose washer has dried out, a seam that worked loose in the wind, or a penetration like a pipe boot or vent that cracked. From the ground the roof can look perfect while one small failure lets water in. We trace the leak back to its actual source on the roof and in the attic, then repair that spot.
How fast can you come out for a metal roof leak?
We move quickly on active leaks, because water in the attic only gets more expensive the longer it sits. Call (432) 288-5562 and we will get you on the schedule, and if the leak is actively running we can talk about a temporary measure to stop the water until the permanent repair is done. We are based in Leander and cover the Austin metro plus statewide TX.
My metal roof took hail. Should I have it looked at even if I do not see a leak?
Yes. Hail can dent a metal panel or stress a seam in a way that does not leak today but will the next time it rains hard. We inspect for hail and wind damage and document what we find with photos, so you know the real condition of the roof. If the damage warrants an insurance claim, that documentation also helps your claim reflect what actually happened.
Do you replace single metal panels, or only do full roofs?
We replace individual panels and fastener runs when that is all that is needed. If a panel is dented, punctured by hail, or oil-canning at a screw line, we can swap that panel without disturbing the surrounding field. That keeps the cost down and keeps the roof you already have on the house.
Is the metal roof repair covered by a warranty?
Yes. Every repair we do carries our lifetime workmanship warranty, so we stand behind the fix for as long as you own the roof. Each job also includes six years of weatherproofing done annually, which means we come back each year and seal small issues before they become leaks. You can ask us to walk through exactly what that covers on your free roof quote.
Stop the leak before it reaches your ceiling
Tell us what your metal roof is doing and we will come look. We find the real source, fix it the right way, and back it for life. Your free roof quote costs nothing and you are under no obligation.
Metal roof repair across TX
Home base is Leander and the Austin metro, but the crew travels statewide for the right job. We repair metal roofs in these cities and well beyond them: